Hi, Jonathan.
As suggested in a previous thread, rotate the distributor to where the
tach cable can be mated cleanly, then move the plug wires so that they
connect the correct distributor towers to the correct plugs, then redo
the ignition timing.
Donald.
> From: Crazeecooter@aol.com
> Date: Thu, 16 Mar 2000 18:59:58 EST
>
>
> Dear Listers:
>
> I am trying to connect my tachometer cable to the distributor (after
> the rebuild)...but it does not quite reach. The timing is set, but
> the part of the distributor where the tack cable goes needs to be
> rotated in a bit for it to work. It is now facing a quater turn away
> requiring the tach cable to have to make a right turn to reach it.
> Is there a way to do rotate the receptacle so that the tach cable
> has a straight shot to connect?
>
> Jonathan.
>
|