Fred Thomas wrote:
> Moss does not sell a standard size reamer, only a oversize, 25/64 is what
> TRFand Joe Currato use when rebuilding H6 & HS-6 carbs (both are the same
> size), so I have no idea what size shafts you would use if you try reaming
> with any other size reamer or drill bit. "FT"
Personally, I would NEVER use an oversize shaft when rebuilding carbs. This
just puts more metal in the air flow path.
/// firstname.lastname@example.org mailing list
/// To unsubscribe send a plain text message to email@example.com
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool