--- Fred Thomas <firstname.lastname@example.org> wrote:
> Moss does not sell a standard size reamer, only a oversize,
This is what I just said, the one the we bought was SDT unlike the
one that Moss sells which is oversize
> 25/64 is what TRFand Joe Currato use when rebuilding H6 & HS-6
carbs > (both are the same size),
Sorry but the counterbore we got from Joe IS 3/8 not 25/64. And this
matches my bushings'OD!
> so I have no idea what size shafts you would use if you try
> reaming with any other size reamer or drill bit. "FT"
I don't understand the meaning of the comment but anyway, the shaft
has a 5/16 diameter which is just right for the reamer we got from
Hope it helps clarify
Listen to your Yahoo! Mail messages from any phone.
/// email@example.com mailing list
/// To unsubscribe send a plain text message to firstname.lastname@example.org
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool