Hi all,
The body is now bolted to the frame, the doors are on and there is 3/8" gap
all the way round and body is level to the frame. The outer skin is now
going to be finished and painted.
There are a couple of questions that have presented themselves:
1/ the rear bumper mount point, the tube goes into the body and that is
where the bracket bolt goes, what is the mount on the inside of the body?
It almost looks like it should go through the frame mount but this does not
seem right.
2/ there are 2 fender stays that hold the bottom rear fender to the frame
(right?). Does anyone have dimensions? Pics? so these can be fabricated.
3/ front inner fender mount, right up by the front most part for the framen
just behind the front skirt. How much distance should be between the fender
and the frame.
Thanks
David A. Templeton
'59 TR3a (I have an almost car wwwwweeeeee)
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|