Kevin,
I only need to replace the turret support section as the towers and the rest
of the frame is solid. After looking at the pictures in the Moss catalog, I
see that the towers are different but it is hard to tell if the support
section is different.
Peter
63 TR4 CT 24422
> From: "Kevin O'Driscoll" <ko3@columbia.edu>
> Subject: TR4 frame repair sections
>
> Peter,
> Two quite different animals, the TR4 and TR4A/250 frames, including the
> front shock turrets. Welding on the front turrets of a TR4a onto a TR4
> chassis would probably not be straight forward, and would surely have to
> do both sides. You could fairly easily swap out the whole frame though
> if you can find a TR4a/250 one thats clean... my car actually has a TR4
> frame under a TR4a body.
> - -Kevin
>
>
>
>
> From: PeterSchop@aol.com
> Subject: TR4 frame repair sections
>
> TR4 are not available." With that said, aren't the front of the TR4 and
> TR4a/250 the same? Will the turret support section of the TR4a/250 fit the
> TR4?
>
> Thanks in advance,
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|