Hello fellow listers.
Today I tried to install my new stereo in my TR-6 and it seemed pretty
straight forward. Purple is constant power(fused) and Green is Accessory
power(fused). Basically, from what I can see...only 3 wires are being used.
1 for constant power, 1 for accessory power and 1 for ground. I connected
all the wires, checked to make sure that they have power when they are
supposed to. Connected the ground. Plugged the battery with key in OFF
position, the oil warning light comes on, but very dim. When I switch to
accessory and back to OFF, the light turns off. But with all that
said...stereo does not turn on. I get no display.
I didn't connect the speaker wires because I just wanted to see if I can get
the stereo to turn on first.
Has anyone installed a stereo themselves? Can someone tell me what am I
doing wrong?
Thanks,
Patrick
70 TR-6 with 69 ignition switch.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|