triumphs
[Top] [All Lists]

RE: TR3A heater/rheostat wiring answer

To: Don Marshall <marshall@nefcom.net>, Triumphs@autox.team.net, Dan Masters <DANMAS@aol.com>
Subject: RE: TR3A heater/rheostat wiring answer
From: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 18 Feb 2002 18:46:43 -0800
Thanks, Don.

That makes perfect sense, as the feed to the fuel gauge is already fused at
the fuse block.

Randall

> On both cars there is an unfused black wire running from the
> heater rheostat
> to the lug on the top right of the fuel gauge as you look at it from the
> back (the lug nearest the rheostat).  Both cars have another wire on this
> same lug, which goes into the wiring harness.  On the TR3B it is solid
> green, on the TR3 it still has a covering on it and I can't see the color,
> although I suspect it's green as well and probably goes back to the fuse
> box.  The other lug on the fuel gauge has a green-black wire on
> the TR3B and
> a covered wire on the TR3, I assume it's also green-black, and that both
> probably go to the fuel tank senders.
>
> There is no fuse between the rheostat and the fuel gauge nor between the
> rheostat and the heater.  The other wire on the rheostat is about 6" long,
> also black, with a bullet connector to connect to the wire leaving the
> heater itself.  If need be, feel free to send Fred down for a personal
> inspection :-)  .
>
> Regards, Don

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>