[Top] [All Lists]

RE: thrust washers

Subject: RE: thrust washers
From: "Randall" <>
Date: Wed, 13 Aug 2003 08:35:00 -0400
Cc: <>
> REPLACE THEM - no short cuts here, if they are pitted they are gone - and
> you can't just smooth the lifters bottoms.  They are ground with a very
> slight crown in them which you wont be able to reproduce by simply lapping
> them on a flat surface -

Any decent cam shop should be able to grind the radius back on the bottom,
but for most lifters they will then need to be hardened.


/// mailing list
///  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>