Re: TR6 rear Bushing replacement procedure

[Don Malling <dmallin@attglobal.net>]

Remove the old bushings with any cheapo (HF) three arm gear puller. I 
bought the set of 3 and used the middle size one.

My trailing arms were out of the car when I did mine. Maybe you can do 
it with the TR in the car -- not sure.

Don Malling


Scott Tilton wrote:
> I'm soliciting any helpful "Been there done that" advice, tips, tricks, etc.
> on the job or replacing the trailing arm bushings on a TR-6 (or 4A or 250)
> 
> Thanks in advance.
> 
> Scott Tilton
> 1970 TR6