triumphs
[Top] [All Lists]

Radiator electric fan switch source

To: triumphs@Autox.Team.Net
Subject: Radiator electric fan switch source
Date: Tue, 9 Nov 2004 09:33:15 -0800
References: <dd.19026d33.2ec21b61@aol.com>
Or  ... you could just install a manual switch out of sight under the 
dash and turn on the fan when the temp gauge says it needs a little 
help ...




>Or you could make your own thermo switch.
>
>Use a hot light switch from a 60's to 90's GM ( 1/2 or 3/8 pipe) Ford ( 3/8 )
>or Chrysler ( 1/4 or 1/8 ). I use a adjusted GM switch on my pickup to give a
>early warning and retained the gauge for a actual reading.
>
>To adjust a GM switch, scrape the paint away from the adjusting screw and
>turn clockwise for a lower temp.
>
>A Ford and Chrysler switch is adjusted by turning the terminal.
>
>A sender from a gauge car will not work.


-- 
Bill  Pugh
1957 TR3
aka
Casper
Wallace, CA




<Prev in Thread] Current Thread [Next in Thread>