triumphs
[Top] [All Lists]

RE: [TR] Distributor springs

To: <triumphs@autox.team.net>
Subject: RE: [TR] Distributor springs
From: "Randall" <tr3driver@ca.rr.com>
Date: Fri, 9 Feb 2007 11:59:03 -0800
> As a start, I'd like to replace the present advance springs 
> in the dizzy, since I don't know if they're oem, or if the PO 
> was playing around with the adv. curve.

You might want to check out the "Tuning Lucas Distributors" article at
http://www.starchak.ca/tech/tech.htm

There are some other good articles on that page as well; "Ignition Advance
Curve Requirements" might also be helpful.

Randall


CONFIDENTIALITY. This electronic mail and any files transmitted with it may 
contain information proprietary to NavCom Technology, Inc., or one of its 
affiliates, and are intended solely for the use of the individual or entity to 
whom they are addressed, shall be maintained in confidence and not disclosed to 
third parties without the written consent of the sender. If you are not the 
intended recipient or the person responsible for delivering the electronic mail 
to the intended recipient, be advised that you have received this electronic 
mail in error and that any use, dissemination, forwarding, printing, or copying 
of this electronic mail is strictly prohibited. If you have received this 
electronic mail in error, please immediately notify the sender by return mail.


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>