triumphs
[Top] [All Lists]

Re: [TR] electronic ignition,

To: TRIUMPHS@autox.team.net
Subject: Re: [TR] electronic ignition,
From: Tim Gaines <mtgaines@mail.presby.edu>
Date: Thu, 8 Nov 2007 10:15:11 -0500
Actually I have opened the box and found lots of empty space, one 
capacitor, one ???? embedded in the case (maybe a transistor?), and 
one "secret" insert with a warning about berillium (sp?).  I don't 
have much idea what any of it does unless a transistor is switching 
voltage on and off in response to some input.

Tim

>Yes, the box needs to be grounded.  As well the steel leads need to be
>clean.
>
>If you're inquisitive, you can open that box and admire the bone stock GM
>HEI ignition module sitting in it.
>
>And as long as you're there, you can question my Triumph or Lucas or
>whomever decided that the GM ignition needed a bunch of other gee-gaws
>installed onto it.  Personally, I disconnected the various capacitors and
>resisters and such.  Most were corroded into non-functionality anyways.
>
>----- Original Message -----
>From: "Tim Gaines" <mtgaines@mail.presby.edu>
>To: <TRIUMPHS@autox.team.net>
>Sent: Thursday, November 08, 2007 7:57 AM
>Subject: Re: [TR] was ballast resistor/ electronic ignition,now I was wrong
>and an apology
>
>
>>  ground problem.  Am I correct in assuming that the module body is
>>  supposed to be grounded.  I am going to try for a more permanent fix
>>  for this problem (not working  right now again), but I want to be
>  > sure that grounding is the proper course of action.
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>