> Not connected to any signals that would do that.
How can you say that, Nolan ? It has to be connected to the ignition
pickup; what better indication of whether the engine is turning or not ?
BTW, the redesigned Crane XR700 does the same thing. The older units had
trouble with overheating when the key was left on with the engine not
running, so the newer ones shut down the pass transistor when the engine
hasn't moved for several seconds.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|