At 11:12 PM 6/17/97 -0700, you wrote:
>I have several problems with my tach. First off it reads about 1500 RPM
>too high for the speed. Secondly, it sometimes just bounces from pin to
>pin..back and forth. And then sometimes it does not work at all.
>BTW it seems that electrical load has some effect on it also. Like,
>switching the lights on will change its behavier. Really weird.. Any
>Ideas?
>
>Steve Robbins
>New Albany, MS
>1965 Series V
>B395000767 LRX
>
Steve,
If you look at a wiring diagram you will see that the tach is wired to the
ignition and the coil...that would seem to make it an electrical problem. I
would look at the connections on your ignition first as two of three go there.
Alicia and Daniel Laris
larisab(at)ix.netcom.com
B395017486LRX
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:44:35 CDT