Bouncy tach

From: Steve Robbins (stever(at)ebicom.net)
Date: Wed Jun 18 1997 - 01:12:03 CDT

Next message: TheMole: "Speedo"
Previous message: sdcf(at)savetrees.com: "Important Information for Students"
Next in thread: Alicia Laris: "Re: Bouncy tach"
Maybe reply: Alicia Laris: "Re: Bouncy tach"
Reply: Roger Gibbs: "Re: Bouncy tach"
Maybe reply: nyclewit(at)nyhp03.serigate.philips.com: "Re: Bouncy tach"
Maybe reply: John Souders: "Re: Bouncy tach"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I have several problems with my tach. First off it reads about 1500 RPM
too high for the speed. Secondly, it sometimes just bounces from pin to
pin..back and forth. And then sometimes it does not work at all.
BTW it seems that electrical load has some effect on it also. Like,
switching the lights on will change its behavier. Really weird.. Any
Ideas?

Steve Robbins
New Albany, MS
1965 Series V
B395000767 LRX

Next message: TheMole: "Speedo"
Previous message: sdcf(at)savetrees.com: "Important Information for Students"
Next in thread: Alicia Laris: "Re: Bouncy tach"
Maybe reply: Alicia Laris: "Re: Bouncy tach"
Reply: Roger Gibbs: "Re: Bouncy tach"
Maybe reply: nyclewit(at)nyhp03.serigate.philips.com: "Re: Bouncy tach"
Maybe reply: John Souders: "Re: Bouncy tach"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:44:33 CDT