On Sat, 20 Sep 1997 14:43:53 -0700 joe kleifges <hardchrome(at)netvalue.net>
writes:
>mill. total cost, $45.29
>
>250 s stock
>dur. int 250 n/a
>dur exh 254 n/a
>int open 17 29
>int closes 53 63
>exh opens 60 69
>exh closes 14 23
>rise .225 n/a
>l/c 108 n/a
It looks like the Stock and 250s specs are reversed as labled.
The 250s cal would correlate to a 272/272 cam or some thing like
a 222/222 (at).050 lift.
This would normally be a great cam if not for the .225 rise "lift?"
The SV cam lobe has .300 lift and the "250s" shows to be quite a bit
smaller at .225.
I hope this is a typo for .325.
Hope they didnt ruin your cam.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:57:05 CDT