Yesterday, while working on my Series 1, I put my volt meter on the temp
gauge. With the car running, I registered some voltage. I'm a novice
with the volt meter, so I not sure what I was doing, but with the probes
on the two lines coming to the gauge I was able to get some readings.
What should I look for. My gauge moves to the lowest reading when I
turn the car on, but does not move even after running car for 20
minutes. I presume the temp. is higher than 90 degrees but the gauge
does not show it. If I have a reading at the gauge, does that mean the
gauge is bad or what.
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:39:49 CDT