fot
[Top] [All Lists]

Re: [Fot] drag co-efficient and frontal area data for selected

To: "Randall" <tr3driver@ca.rr.com>, "Ken Gano, home"
Subject: Re: [Fot] drag co-efficient and frontal area data for selected
From: "Terry Stetler" <tlizzard@msn.com>
Date: Tue, 15 Jul 2008 13:08:37 -0400
I believe the difference can be attributed to the TR-2's smaller radiator
opening.

That gaping maw on the 3 is pretty draggy.  (I never should have sold my 2).

Terry Stetler
  ----- Original Message -----
  From: Larry Young<mailto:cartravel@pobox.com>
  To: Randall<mailto:tr3driver@ca.rr.com> ; Ken Gano,
home<mailto:triumphs@consolidated.net> ; jibjib@att.net<mailto:jibjib@att.net>
  Cc: FOT<mailto:fot@autox.team.net>
  Sent: Tuesday, July 15, 2008 10:44 AM
  Subject: Re: [Fot] drag co-efficient and frontal area data for selected
Triumphs


  I did a bit more on this stuff.  The inconsistency was to do with the
  power available and power required.  The Autocourse article has
  unreasonable values even though it states "Power at road wheels".  I
  don't believe a motor that dynos 90hp can generate 86hp at the road
  wheels.  Once scaled back, everything looks reasonable. It looks like Cd
  = 0.48 for the TR2 and 0.58 for the TR3.  In Jabekke trim, the Cd =
  0.43, but with frontal area reduction CdA was 32% less. I don't know why
  the TR3 should be that much different from the TR2.  The only major
  difference is that the TR3 test was for a hardtop car, while the TR2
  tests were for a soft top with top and sidescreens erected.  I'd think a
  hardtop would be better. The numbers are supported by the top speeds.
  The TR2 went slightly faster with 10 fewer ponies.
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>