Mike, List,
When you see the results of the forces some of these cages and frames are
subjected to in an "incident" the question is not just is the tubing strong
enough but is the bracing and welding up to absorbing the forces. Mayf
mentioned a while back that he had the triangulation figured out on his
cage. I thought at the time that it would be nice to have a rocket
scientist or a structural engineer to run such a structure by just to make
sure things were properly thought out. The days of Harvey Haller and a roll
bar shorter than the top of his head are thankfully over on the salt. The
ruling a few years ago requiring the additional roll-cage distance forward
from the front of the face shield caused some grumbling but made such good
sense. I have no idea of the qualifications of all the inspectors but would
hope that those with the knowledge would have the guts to step up and say
something when they think a critical structure is not properly built.
Wes ... with a square of George"s Salt Sonnett as a reminder.
----------
> From: "Mike Manghelli" <mmanghel@hughes.net>
> To: "John Beckett" <landspeedracer@email.msn.com>,"Tom Neimeyer"
<3cbxs@ev1.net>,"Land Speed" <land-speed@autox.team.net>
> Subject: Re: Chassis Tubing
> Date: Sat, 15 Jul 2000 17:55:13 -0700
>
>John,
>
>You are correct about the added tubing and bring up a good point about the
>motorcycles.
>
>Skip, this sounds like another one for the rules committee to look at, add
>it to the list.
>
>Mike Manghelli
>SCTA President
>-----Original Message-----
>From: John Beckett <landspeedracer@email.msn.com>
>To: Tom Neimeyer <3cbxs@ev1.net>; Land Speed <land-speed@autox.team.net>
>Date: Monday, February 14, 2000 6:44 AM
>Subject: Re: Chassis Tubing
>
>
>>Tom
>>
>>Generally the extra weight of the larger tubing isn't a problem with LSR
as
>>it would be in drag racing. And the added security of the larger material
>>may well be worth the slight extra cost. Hey the I/BGS record is 253 MPH!
>>
>>I've often wondered why Motorcycle Streamliners are allowed 1 1/4-inch x
>>.090" tubing when some of these guys are running over 300 MPH.
>>
>>John Beckett, LSR #79
>>
>>----- Original Message -----
>>From: "Tom Neimeyer" <3cbxs@ev1.net>
>>To: "Land Speed" <land-speed@autox.team.net>
>>Sent: Sunday, February 13, 2000 9:59 PM
>>Subject: Chassis Tubing
>>
>>
>>> LSR'ers,
>>> In the next year I plan on building a small streamliner. My
>>understanding
>>> from reading the rule book is that I can build the frame/rollcage from 1
>>5/8
>>> .120 thick DOM steel tubing. Is this correct? The liner will be
either
>>> H/GS or I/GS or possible H/BGS or I/BGS. Any benefits to use 1 3/4 ?
>>>
>>> Thanks, Tom
>>>
>>>
>>
>>
>>
>
>
|