land-speed
[Top] [All Lists]

Re: welding/metal work

To: "Nafzger" <nafzger@vtc.net>, "Keith Turk" <kturk@ala.net>,
Subject: Re: welding/metal work
From: "Nafzger" <nafzger@vtc.net>
Date: Wed, 17 Jan 2001 18:58:43 -0700
Hello!
 I finally woke up and realized I left off a few old but very important
tools. A 12' x 36" lathe, a Bridgeport "J"head mill, a Doall 18" bandsaw,
Gas, MIG, and TIG welders,electric shears, an 8000# single post hoist in the
shop floor (usually in the way but really handy), and all the normal hand
tools. It may seem like I have a lot of stuff for a poor guy but realize how
many years it took to accumulate it.
Howard

----- Original Message -----
From: "Nafzger" <nafzger@vtc.net>
To: "Keith Turk" <kturk@ala.net>; "Dick J" <lsr_man@yahoo.com>; "Skip &
Joyce Higginbotham" <saltrat@pro-blend.com>; <land-speed@autox.team.net>
Sent: Wednesday, January 17, 2001 4:09 PM
Subject: Re: welding/metal work


> Keith,
> I have a bead roller, shrinker and stretcher, and a 4' brake. Other than
> that it's hammer and sandbag and hardwood hammer forms. I'm not very good
at
> it but too dumb to stop trying to get better.
> Howard
>
> ----- Original Message -----
> From: "Keith Turk" <kturk@ala.net>
> To: "Dick J" <lsr_man@yahoo.com>; "Skip & Joyce Higginbotham"
> <saltrat@pro-blend.com>; <land-speed@autox.team.net>
> Sent: Wednesday, January 17, 2001 11:39 AM
> Subject: Re: welding/metal work
>
>
> > Practice your Gas welding skills... cause that Tig is just about like it
> > only better...
> >
> > Metal work.... Just curious how many of you are into Metal work?  I was
> > Talking to Joe the other day when I ordered my master cut off....
> Anyway
> > he was talking about a Motorized Bead roller and I think he has an
English
> > Wheel....  Who else out there is into the Metal smithing side of this?
> >
> > I'm not.... I am just fascinated with the skills of a fabricator...
> someone
> > who can design something in his head or on paper and come up with it as
a
> > REAL usefull product....
> >
> > Keith ( yep I was wrong then I admitted it.. then I followed through
with
> my
> > own advice...hmmm )
> > ----- Original Message -----
> > From: "Dick J" <lsr_man@yahoo.com>
> > To: "Skip & Joyce Higginbotham" <saltrat@pro-blend.com>;
> > <land-speed@autox.team.net>
> > Sent: Wednesday, January 17, 2001 12:20 PM
> > Subject: Re: Roll cage welding
> >
> >
> > > After all the input on welding, I was starting to
> > > get very leary of my own welding.  I certainly
> > > can't pass up an offer like this.  Skip, it'll be
> > > late summer, or even next fall, but I'll be
> > > calling on you.
> > >
> > > Thanks
> > > Dick J
> > >
> > > --- Skip & Joyce Higginbotham
> > > <saltrat@pro-blend.com> wrote:
> > > > Dick,
> > > > Rather than stick weld them I'd rather you
> > > > brought the car over here to
> > > > Bastrop and I'll TIG the cage for you.......or
> > > > show you how to do it.
> > > > Skip
> > > >
> > > >
> > > > At 08:03 AM 1/17/01 , you wrote:
> > > > >That's what I was looking for.  Somebody who
> > > > was
> > > > >running with older technology welding.  I've
> > > > got
> > > > >all the tubes on my roadster cage bent and
> > > > tacked
> > > > >in place.  I would have to take a long day and
> > > > >drive nearly five hundred miles to get the guy
> > > > >who started the thing for me to finish weld
> > > > it.
> > > > >I've been leaning towards just running the
> > > > beads
> > > > >myself with my buzz box. I keep thinking:
> > > > "This
> > > > >ain't no 200 mph car.  It's prolly not even
> > > > going
> > > > >to see 150."  The rules only require a roll
> > > > bar,
> > > > >so the cage is just frosting (the kind I like
> > > > -
> > > > >-safety stuff).  I dunno, I'll lay down some
> > > > >practice beads in the spring - if they look
> > > > good,
> > > > >I'll go after the roll cage.  If they look
> > > > >crappy, I'll pack a picnic lunch and make the
> > > > >drive to south Louisiana.  Could take another
> > > > >look at Phil Landry's car anyhow.
> > > > >
> > > > >
> > > > >--- Richard Fox <v4gr@rcn.com> wrote:
> > > > >> Dick; My Vega cage was done with my buzz box
> > > > >> and looks OK to me. But I
> > > > >> haven't tested it yet and hope not to. Rich
> > > > Fox
> > > > >> -----Original Message-----
> > > > >> From: Dick J <lsr_man@yahoo.com>
> > > > >> To: The Butters Family <bbutters@dmi.net>;
> > > > >> ARDUNDOUG@aol.com
> > > > >> <ARDUNDOUG@aol.com>;
> > > > land-speed@autox.team.net
> > > > >> <land-speed@autox.team.net>
> > > > >> Date: Tuesday, January 16, 2001 02:40 PM
> > > > >> Subject: List Police - Back to LSR !
> > > > >>
> > > > >>
> > > > >> >Let's not beat the poor guy to death.  I'm
> > > > >> sure
> > > > >> >that by now he get's the idea that the post
> > > > >> was
> > > > >> >inappropriate.  He is into LSR, and we are
> > > > >> into
> > > > >> >LSR, so let's drop all of this and get back
> > > > to
> > > > >> >LSR.  I don't think there are many among us
> > > > >> who
> > > > >> >haven't made some off-color remark, at some
> > > > >> time
> > > > >> >in our life, only to realize a second too
> > > > >> late,
> > > > >> >that a wife, preacher, teacher, or somebody
> > > > >> was
> > > > >> >present to make our face turn red and wish
> > > > we
> > > > >> >could hide under a rock.
> > > > >> >
> > > > >> >So, about this welding stuff.  Back in the
> > > > >> olden
> > > > >> >days, were roll cages and chassis welded up
> > > > >> more
> > > > >> >with gas welding, or with buzz boxes?
> > > > i.e.,
> > > > >> >since it ain't gonna be mig or tig, which
> > > > of
> > > > >> my
> > > > >> >antiquated devices should I be using for
> > > > this
> > > > >> >kind of work?  I personally like working
> > > > with
> > > > >> the
> > > > >> >torch, I can melt that stuff right to the
> > > > >> point
> > > > >> >of burning through, then start feeding rod.
> > > >
> > > > >> With
> > > > >> >the buzz box, I sometimes burn holes, then
> > > > >> have
> > > > >> >to get the torch out and start melting in
> > > > >> order
> > > > >> >to fill them back up.
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> >=====
> > > > >> >* * * * * * * * * * * * * *
> > > > >> >*         Dick J          *
> > > > >> >*    (In East Texas)      *
> > > > >> >*         # 729           *
> > > > >> >*     C/GRS   E/STR       *
> > > > >> >* * * * * * * * * * * * * *
> > > > >> >Get email at your own domain with Yahoo!
> > > > Mail.
> > > > >> >http://personal.mail.yahoo.com/
> > > > >
> > > > >
> > > > >=====
> > > > >* * * * * * * * * * * * * *
> > > > >*         Dick J          *
> > > > >*    (In East Texas)      *
> > > > >*         # 729           *
> > > > >*     C/GRS   E/STR       *
> > > > >* * * * * * * * * * * * * *
> > > > >Get email at your own domain with Yahoo! Mail.
> > > >
> > > > >http://personal.mail.yahoo.com/
> > > Get email at your own domain with Yahoo! Mail.
> > > http://personal.mail.yahoo.com/

<Prev in Thread] Current Thread [Next in Thread>