Nah, a lot of them are held on with hose clamp type devices. The
thermocouple "bung" is attached to the clamp and then the probe is inserted
and the clamp tightened around the header pipe.
mayf
----- Original Message -----
From: "Salt Hawk" <salthawk@coldreams.com>
To: <saltracer@awwwsome.com>
Cc: "Jonathan Amo" <webmaster@landracing.com>; "Finishline Coatings"
<lona@finishlinecoatings.com>; <land-speed@autox.team.net>
Sent: Wednesday, November 28, 2001 1:20 PM
Subject: Re: This is not an Advertisement
> Well I guess I would have considered that except they appeared to be
> about 1/8 " in diameter and burned in their with a torch instead of
drilled,
> don't most exhaust temp probes screw into the header? Kvach
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|