mgs
[Top] [All Lists]

Re: MGA Chassis Number

To: George Merryweather <merryweather@venus.connectware.com>
Subject: Re: MGA Chassis Number
From: "Peter G. Gilvarry" <petergg@ibm.net>
Date: Mon, 06 Jan 1997 20:15:52 -0800
George Merryweather wrote:
> 
> A confirmation of what 'Ernest' said.  A '15' on the head indicates a 1500 or 
>1600 head.  A '16' is a 1622, which is the same as the later '18' 
head for the 18
> 
> ----------
> From:   Ernest[SMTP:lawref@lawref.com]
> Sent:   Monday, January 06, 1997 2:23 PM
> To:     Peter G. Gilvarry
> Cc:     mgs@autox.team.net
> Subject:        RE: MGA Chassis Number
> 
> I think a minor correction would be in order. The 16 on the head probably 
>indicates a 1622 head. The 1500 and 1600 both had 15 on the head 
(in most cases per m
> 
> Also, the chassis number can usually be found stamped on the frame cross 
>member under the passenger's knees. It will be the number only 
without the GHN... lett
> 
> In every case I have looked for that stamped number on the frame I could not 
>find it until I hit it with a sandblaster. Then it pops out.
> 
> The body number near the hinge is useless for identification purposes.
> 
> Ernest
> 
> ----------
> From:   "Peter G. Gilvarry" <petergg@ibm.net>
> Sent:   Sunday, January 05, 1997 16:39 PM
> To:     Chris Leah <crl@iafrica.com>
> Cc:     mgs@autox.team.net
> Subject:        MGA Chassis Number
> 
> Chris,
> 
> It appears as though the number is a body number, if it is located on the
> right hand side of the firewall adjacent to the hinge.
> 
> >From the Moss catalog:
> 
> MGA 1600 produced from May 59 to April 61. The cahssis number should be
> on a plate affixed to left hand side of firewall shelf, but as that
> appears to be missing you could be in a pickle.
> 
> The first 1600 would have been GHN68851, last GHN100351.
> 
> The engine is definitely 1600 as 16 means 1600, G means MG, A means 1600
> series, U is center change gearbox, H means High-Compression.
> 
> Sorry I can't be more helpful, but I will try to scan the page and attach
> to an Email as a file.
> 
> I am looking for a MGA but the guy I am negotiating with has now said his
> wife wants to raise the price. It is a 166 MKII with wire wheels, but
> today I found a MGTD, for a similar price, so maybe that is the way to
> go.
> 
> Regards ...... Peter Gilvarry
> petergg@ibm.net

The 16 I am referring to is in the engine number. The 1622 engine would 
be 16 GC, 16 GA for 1600 series.

I am quoting from Moss Manual.

Rgds ...... Peter Gilvarry



<Prev in Thread] Current Thread [Next in Thread>