When you had the clutch MC apart and where cleaning it, did you get the
primary seal in the right way around on re-assembly? If not it'll leak like
a sive under pressure and the clutch won't work.
From: Carl French <email@example.com>
To: Max Heim <firstname.lastname@example.org>
Cc: email@example.com <firstname.lastname@example.org>
Date: Saturday, August 07, 1999 8:14 AM
Subject: Re: Clutch version 2.01
>Max Heim wrote:
>> Well, since you have no pedal pressure and no fluid coming out at the
>> bleed screw, it is apparent you are not generating any pressure at the MC
>> (that is, so long as you actually have fluid in the reservoir). So I am
>> afraid you need to replace or rebuild the MC, no two ways about it.
>> Sorry. But, just to check, you could undo the pipe fitting at the MC to
>> see if any fluid squirts out there.
>> BTW, why did you replace the pipe going down to the flex line? Not that
>I bleed it out completely this am and the pedal does push fluid out the
>bleed screw but still no clutch action. Maybe I bodged the slave