mgs
[Top] [All Lists]

Re: Bleeding Clutch Cylinders

To: "MG List" <mgs@autox.team.net>
Subject: Re: Bleeding Clutch Cylinders
From: "james" <jamesnazarian@netzero.net>
Date: Mon, 22 Apr 2002 23:34:37 -0600
In an only slightly related note, I found an interesting tool for adjusting
the shoes on the rear drums.  The adjuster is a 1/4? square bolt and many
sources say that you should use the proper 4 sided tool to keep from
rounding the bolt.

My g/f's dad gave me a tool he found one day because he thought I may be
able to use it.  It turns out to be some kind of four sided spigot or valve
wrench for plumbing.  It has four different square drive ends and one of
them is a good fit for the adjuster on the rear drums.

I've always just used an open end wrench, but I thought I'd pass this on if
anyone is interested.

james

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>