In a message dated 5/8/03 11:35:16 AM, wcameyer@msn.com writes:
<< I install a successful dead pedal in all my B's. I use a piece of wood
sized so it will reach the firewall, approximately 5-6" long. 1 1/4" x 1
1/4" is ideal, but 3/4" thickness will work. Leave the piece full thickness
for about an inch, then taper it to 1/4" at the back (end against firewall).
To mount it, just screw to the side sill member, level with the top surface
of the sill. >>
Bill,
Thanks. I was thinking along those lines.
Jay Donoghue
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|