The resistor goes between the regular feeder from ign switch. Standard Ignition
RU-4 works. It's for a Mopar. Others may work also. BTW as you may already
know, the 12 volt starter should only be used with a 12 volt flywheel as it
will tear up the 6 volt flywheel.
Grant 50 3100
Allen L. Jones wrote:
> I've converted everything over to 12 volts with only the coil remaining to
>purchase (kept the point distributor and changed to a 12V starter). Do I need
>to run an external resistor with an external 12V coil? If so, does it go
>between the starter bypass and the coil or the regular 12V feeder wire (from
>the cab) and the coil? I've looked at the chevytrucks web site and see no
>reference to what brand/type/size of resistor I would need. Can anyone tell
>me? Thanks for the h_e_l_p.
>
> Allen
> '50 3100 (damn near finished.....)
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|