Jim,
Did you make sure that the hole in the master cylinder is not plugged.
Just a thought as I had that happen on my '68 Buick GS400 once.
Good Luck,
Jim V.
At 09:40 PM 7/13/99 Tuesday -0500, Jim and Elaine wrote:
>What a response! Thanks for all the suggestions! I just rebuilt the dang
>thing again tonight with another kit and the same results. Everything is in
>in the right direction, etc so that wasn't it. It's too late (dark) to look
>in the reservoir to see if fluid is getting through past the piston like it
>should, so I'll check that tomorrow. I'll also check the brake adj at the
>wheels, although there was some braking action when I pumped the pedal
>before the rebuild, so I doubt that's the case. I believe the poor thing's
>been honed once too often. If that's the case, I may need to take you up on
>your offer, Keith! Anyway, thanks for such a great response from everyone.
>I'll let ya'll know how it comes out. Ya'll help make this whole endeavor
>fun!
>
>Jim Phipps
>57 3604, 3/4t
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|