Hi Jim,
Looks like we have alot in common, same height, same year tr6 and same
steering wheel, I got the 13" mahagony one to go with the mahagony dash I
built over the winter. I set up my new wheel with the contact off of the old
stock horn button. Simply drill out the rivet in the back of both the old
and the new buttons. Then carefully pop the front of the button off, screw
(bolt, lock washer & nut) the old contact onto the new button, pop the front
back on and you are all set. Line up the new button with the old contact to
the horn brush (don't forget to put the brush back) and you are all set. Oh
yes, once installed get rid of the M hub decal an apply the Triumph one!
Al King
75 TR6
|