[Top] [All Lists]

Re: [6pack] Something New (74 TR6)

To: "'Stuart Thompson'" <stuartt@tlthompson.com>, <TR6UO@aol.com>,
Subject: Re: [6pack] Something New (74 TR6)
From: "Robert Liam Gannon" <trsix74@comcast.net>
Date: Mon, 9 Nov 2009 17:49:31 -0500
You fill the transmission until it pours back out of the fill hole. In
absence of a car lift, basically you need to jack up the car and put jack
stands at all four points , making sure the car is level. Then remove the
drain plug and let the fluid out. I always do something else while that's
happening, letting all the old fluid out. It helps to remove the fill plug
too, letting air in as fluid runs out. Then I re insert the drain plug and
fill the transmission using a pump and hose to get it from the bottle to the
hole. When it starts to flow back out of the transmission I know it has
enough. Close up the fill hole with a cleaned plug. Ready to drop the car
and the job is done. If you have overdrive like my TR3, you will need to
open the filter plug as well as the drain plug. While the filter plug is
out, clean the mesh.

Support Team.Net  http://www.team.net/donate.html



<Prev in Thread] Current Thread [Next in Thread>