> Actually the wheel width must stay the same as stock, it's the offset that
> can very +- 1/4" (6.35mm) from stock.
DOH - my bad! I knew SOMETHING could vary. Thanks to those who took me up
on my invitation to correct me if I'm wrong. I went to ST partly so I
didn't have to worry about it. :)
> And you should see those same 215/50-13 tires on 5" wide Honda rims. They
> look like mini-cantilever tires.
Geez - I can only imagine!
> You can fit any size DOT approved tire on the "stock sized" rims that you
> want as long as the tread doesn't stick out past the edge of the fender
when
> viewed from above. Unless it came that way from the factory.
Right - I forgot about that overhang part.
- Justin
|