autox
[Top] [All Lists]

RE: harness bar legality in stock?

To: "autox mailing list" <autox@autox.team.net>
Subject: RE: harness bar legality in stock?
From: "Paul Zahornasky" <p.zahornasky@att.net>
Date: Mon, 19 Mar 2001 20:06:50 -0500
Check out section 13.2.H

The 2000 book states that a telescoping harness bar may be used as long as
it serves no other purpose.  I seem to remember that 'telescoping' was
removed for 2001, but do not have a 2001 book to verify this.

Paul Zahornasky
27 CM

-----Original Message-----
From: owner-autox@autox.team.net [mailto:owner-autox@autox.team.net]On
Behalf Of Joe Delio
Sent: Monday, March 19, 2001 7:37 PM
To: matthew c. mead; autox mailing list
Subject: Re: harness bar legality in stock?


I am talking out of my butt here.. but here goes..

I initially would think that a "harness bar" would be illegal..
for many of the "stock" reasons.  But then I start to think
about all that you can do.. and unless I understand the
rules incorrectly.. can't you install a Roll Cage into a "stock"
car? This would deffinately do a great job of stiffening the chasis..

What do you guys think.

joe
----- Original Message -----
From: "matthew c. mead" <mmead-autox@goof.com>
To: "autox mailing list" <autox@autox.team.net>
Sent: Monday, March 19, 2001 2:34 PM
Subject: harness bar legality in stock?


I have recently acquired a harness bar.

Someone mentioned to me that it may not be legal in stock
classes.  While I can certainly expect an exception in my local
region, in regional or national events if it in fact is not
legal I would expect weeny protests.

This of course assumes a) I go to a regional or national event,
and b) I win.

Neither of these are likely to happen, certainly not anytime soon,
but I'm still curious.

I have a 97 M3 Sedan, a fairly stiff car.  Is a harness bar that
bolts between the shoulder belt mount points with downrods to the
outside rear of each front seat legal?  There is no triangulation
involved, which says to me that it does nothing to stiffen the car.
If the car were to implode at the tops of the B pillars, -MAYBE-
it would help resist that, but the bar should just flex along with
the car in any normal flex.  It's not like the tops of the B pillars
get any closer together during body flex, right?

What do you think?

Thanks.



-matt

--
matthew c. mead

mmead (at at at) goof (dot dot dot) com (you know what to do to email me)
http://www.goof.com/~mmead/

<Prev in Thread] Current Thread [Next in Thread>