That is when the splines are meshing with the main shaft. So you
will need to remove the overdrive and look inside and re align the
splines.
The easiest way is to stand the transmission on the floor with the
bell housing on the floor sitting on a couple of 2x4s, then you can
set the overdrive onto the transmission.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Sep 2, 2008, at 2:01 PM, Kenny J wrote:
> Hey List,
>
> I am attempting to reinstall my O/D onto the gearbox. It slides on
> pretty
> easily until I get within the stud length (the last 1/2 - 3/4
> inches) the O/D
> will not slide any further. Please Help. Thanks
>
> Kenny
> 61 BT-7
> _________________________________________________________________
> Get thousands of games on your PC, your mobile phone, and the web with
> Windows..
> http://clk.atdmt.com/MRT/go/108588800/direct/01/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|