Years ago I worked in shop that just did Brit cars. Jag engines always came
out using the brackets on the head bolts, but MGs, Healeys, Sunbeams,
Triumphs, etc., all came out as you describe - with a chain fed under the
rocker shaft - one at the front and one at the back.
I was always concerned about damaging the springs that locate the rocker
arms, but it never did seem to affect them.
Mirek
60 BT7
----- Original Message -----
From: "Earl Kagna" <kags@shaw.ca>
, he wraps his lifting chain around the rocker shaft, so
the weight is taken by the assembled shaft. He much prefers to install the
engine and gearbox assembled together as a unit -
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|