Re: [oletrucks] Here's an easy one: Which Oil Filter?

[Advdesign1@aol.com]

In a message dated 08/25/99 02:38:07 AM Eastern Daylight Time, 
jay@duncanson.com writes:

<< 
 Are you saying I should run without any oil filter at all >>

the filter was an option, so the factory didn't think it was necessary.  Plug 
off the 2 ports at the block.  I once had a 216 customer with low oil 
presure.  He had run a jumper between  block inlet and outlet, bypassing 
filter, and dumping lots of oil pressure.  Plug them off if you don't use the 
filter.
Bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959