[Top] [All Lists]

Re: [oletrucks] From manual to automatic

To: oletrucks@autox.team.net
Subject: Re: [oletrucks] From manual to automatic
From: Banjomike@aol.com
Date: Fri, 22 Oct 1999 13:03:47 EDT

Thanks for the information.  Hopefully I've got a good start.  When I first 
bought the truck, it had a 327 engine.  When I put in the 350, I used the 
bell housing and starter from the 327. The front engine mounts are on the 
side.  I also have the flex plate and the torque convertor, and the 
transmission was a '"rebuilt" when I bought it.  

Not sure what a kick down cable is.  (Actually I'm positive I don't know what 
it is).  This transmission has a vacuum connection on it, which I'm pretty 
sure needs to be connected to a vacuum connection on the carbuerator.  (I'm 
dancing in the dark here).  Is that the same as the kick down cable?

Thanks again.

Mike Gleeson
'55 long bed
'55 bus

On the original 
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>