Scott, when the point gap gets smaller the timing advances. This raises the
idle.
Bill G
----- Original Message -----
From: <ScottBarr8@aol.com>
To: <rick_gregory@yahoo.com>
Cc: <spitfires@autox.team.net>
Sent: Saturday, April 24, 1999 7:19 PM
Subject: Re: Distributor question - Crane System
>
> In a message dated 4/23/99 11:49:37 PM Central Daylight Time,
> rick_gregory@yahoo.com writes:
>
> <<
> My distributor appears worn. One of the lobes on the
> shaft is noticably more worn than the others. And the
> point gap seems to close weekly. Will my worn
> distributor work okay with the new Crane System? >>
>
> Rick,
>
> >From what I've been told by various reliable sources, the dreaded shaft
> wobble should be repaired in order to get good performance from your Crane
> System.
>
> But if your point gap only closes "weekly" wouldn't this lead to a very
slow
> idle? ;-)
>
> Scott
> ScottBarr8@aol.com
> 72 GT6
>
|