Good idea Doug and Nadia.
Joe send me your sawn off battery box and I will share the results of this
new concept.
Seriously
Larry
> Assuming all the rust and holes are in the bottom of the battery box,
> chop off the bottom port of the box, and cut off the top part of
> the replacement box. Then shove the new part up over the old box
> from inside the car, and put rivets/screws in the sides to hold
> them together. With the battery in place, the repair would not
> be visible.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|