Is a heat sink like a hot tub?
Nooo, ... please don't answer!!! :)
Robert D.
-----Original Message-----
From Wiedemeyer <boxweed at thebest.net>
To: DLancer7676@cs.com <DLancer7676@cs.com>
Cc: spridgets list <spridgets@autox.team.net>
Date: March 16, 2000 6:32 PM
Subject: Re: Structural Repair
>The consensus seems to be that the appropriate heat sink should be made of
>copper, for 2 reasons: 1) It dissipates heat faster. 2) It won't get
>stuck in the weld. That's what I'm going to try. Thanks, guys!
>
>Bob
>-----Original Message-----
>From: DLancer7676@cs.com <DLancer7676@cs.com>
>To: boxweed@thebest.net <boxweed@thebest.net>; WRROOPE@aol.com
><WRROOPE@aol.com>
>Cc: spridgets@autox.team.net <spridgets@autox.team.net>
>Date: Thursday, March 16, 2000 6:01 PM
>Subject: Re: Structural Repair
>
>
>>In a message dated 3/16/2000 11:50:44 AM Eastern Standard Time,
>>boxweed@thebest.net writes:
>>
>><< Is there anything specific that one can buy to use as a heat sink, >>
>>
>>Bob:
>>
>>I was told by an old mechanic to clamp a fairly thick piece of solid
copper
>>behind the piece you are welding. I have never tried that. Anyone?
>>
>>--David C.
>
>
|