Jim,
In my Youth, I was 6'-3" and don't remember having a problem. I did drive
with the seat as far back as it would go. I've shrunk an inch or so and
expanded some in the middle and can still fit fine. Let me know if you need
any measurements or a pattern. I just got the body back on the frame and
don't have seats in it.
Rob Robertson
TR3a TS25054
-----Original Message-----
From: JAMES_S_WALLACE@HP-Canada-om1.om.hp.com
<JAMES_S_WALLACE@HP-Canada-om1.om.hp.com>
To: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Monday, September 07, 1998 4:00 PM
Subject: TR3a seat location on floor?
>
> Greetings,
> I've made a new floor for the driver's side (passenger has to wait)
> and am seeking advice with regard to the fore and aft position of the
> seat rails.
> Having never driven a TR3, I don't know whether the original seat rail
> mounting position would have been good for me, but I think I've heard
> it mentioned that the rearmost position of the driver's seat is still
> too far forward for some people.
> I do not have the adjustable steering column, and am 175 cm. tall.
> (Five foot nine and a half in 'Murcan measure.)
> Whaddayall think?
> Jim Wallace
> Ottawa, Canada
> TS81417
>
>
|