"KENNETH A. vonKLUCK wrote:
I had the motor mounts on my 63 TR-4 replaced with new mounts purchased
from Moss. I do not know how my mechanic replaced the mounts but I have
learned since that the new mounts are not the same as the original and
there is virtually no clearance between the fan hub extension and the
steering rack. This becomes a major problem if you have to change your
fanbelt. Make sure that the new mounts do not lower the motor.
------------
Hi Kenneth & list!
Suggestion to fix that problem: Use "fender washers" between the upper
mount & motor front bearing plate. -Cosmo Kramer
|