In a message dated 2/22/2001 11:50:06 AM Eastern Standard Time,
105671.471@compuserve.com writes:
<<
Darrel, try two O-rings. If one isn't thick enough maybe stacking two will
seal up tight. Or try a bearing/seal house and find an O-ring with the
same OD but a thicker cross section. Tell them what type of fluid to which
it will be subjected and they can select a appropriate material.
>>
Dave,
The problem with the Repro plate is that the diameter of the hole is too
large not the depth of the countersink. I have the original plate that needs
repaired so I think I`ll go that route. Still need the Captain Marvel`s for
the OD adapter gasket. I know that is wishful thinking.
Darrell
///
/// triumphs@autox.team.net mailing list
///
|