Message text written by INTERNET:TR250Driver@aol.com
> It
seems that the countersunk hole on the backside where the o-ring sits is
too
large not allowing it to seal properly. Listers beware these plates are no
good. Do any of you guys know of any Captain Marvels Magic OD Transmission
Sealer!
Whoa-is-Me!
Darrell Floyd
<
Darrel, try two O-rings. If one isn't thick enough maybe stacking two will
seal up tight. Or try a bearing/seal house and find an O-ring with the
same OD but a thicker cross section. Tell them what type of fluid to which
it will be subjected and they can select a appropriate material.
Dave Massey
57 TR3
71 TR6
80 TR8
///
/// triumphs@autox.team.net mailing list
///
|