Is that due to that there is more brake line running to the drivers side rear
than the right rear??
Jim
> -----Original Message-----
> From: JMcmahon@ICTGROUP.COM [mailto:JMcmahon@ICTGROUP.COM]
> Sent: Wednesday, February 4, 2004 03:30 PM
> To: reveye@speakeasy.net, 105671.471@compuserve.com
> Cc: triumphs@autox.team.net
> Subject: RE: TR3A bleeding procedures
>
> I made a pretty dumb mistake the first time I bled my TR3 -- when I was a
> motorhead kid, whenever I bled brakes it was always the right rear first
> because it furthest from the master cylinder...on TR3's the drivers side,
> left rear, is furthest from the master cylinder and must be bled first.
>
> -----Original Message-----
> From: reveye@speakeasy.net [mailto:reveye@speakeasy.net]
> Sent: Wednesday, February 04, 2004 9:23 AM
> To: Dave Massey; Rissa and Jim
> Cc: triumphs@autox.team.net
> Subject: Re: TR3A bleeding procedures
>
>
> Dave, thank you very much. I guess one other question I have....if bleeding
> it the classic way with 2 people, do I need to bleed at the lines where they
> meet the master cylinders before moving on to each calliper and wheel
> cylinder? And, once moving on to the wheels, is it still the preferred
> procedure to start at the wheel furthest from the master cylinder and work
> towards it??
|