> Bill, from what I can see in my Vanguard III SPC, the problem of
> compatibility might well lie in that spindle. The Vanguard uses a
> pulley with a mount
> for a fan, while the TR motors had the fan on the crankshaft. If
> the Vanguard
> fan pulley isn't compatible with a TR water pump's spindle, there's your
> problem (I suspect).
Don't know that this helps, but the Morgan Plus 4 used a pulley with a fan
mounted on it and that pulley would fit on a TR2-4 pump. (The Morgan may
well have used the same pump tho, I don't know.)
Randall
|