Re: TR6 - groove worn into discs

["Ian Viles" <ian.viles@ntlworld.com>]

Randall,

Thanks for your comments.  I agree that the grooves worn into the discs are 
not the cause of poor brake performance.  Having previously renewed the 
pads, flexible brake lines and checked the servo function - could the 
calipers be the culprits?

As for the grooves, I'm hoping that new stub axles and bearings will stop 
them reappearing.  While I'm at it I'm going to fit 'superflex' bushes plus 
renew the top balljoints and trunnions as well - be as well now that it's 
all in bits!

Regards,
Ian Viles