RE: 3a mystery washer/shim

[Jim Wallace <jim.wallace@netscape.ca>]

Bingo.
Thanks,
Jim

At 01:14 PM 30/10/2005, you wrote:

> > On re-assembly I find on the floor a washer that
> > <snip> It's i.d. is .875" and its o.d. is 1.166". It's
> > thin, like about 0.017".
>
>Sounds to me like one of the shims that go under the head of the front crank
>bolt, to set the handcrank angle relative to TDC.
>
>Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org