Re: [TR] Tr3A Upper wishbone bushing replacement question

[Dave1massey@cs.com]

In a message dated 3/19/2006 10:45:25 AM Central Standard Time, 
Kinderlehrer@comcast.net writes: 
> I guess I really have little choice, I will try one more time to get the 
> arm off with the fulcrum pin in place. If that fails I will remove the arm 
>and 
> hope for the best.  Worst case, I will have to remove the spring.
>  
> 
Which, in the big picture, really isn't all that bad.  Good luck.

Dave


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org