>The dome of one of my Su Carbs (H6) does not have correct alignment with
>its body, so much so that its piston gets stuck. Either loosening the
>three screws at its bottom and/or unscrewing the damper oil gauge stick
>allows the piston to go up and down. But, of course, how do I fix it?
>
>Thanks, Paul Dorsey
Paul:
Sounds like you need to center the metering jet. The manual tells you how,
so I won't go into it.
John
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|