If you take it apart and polish the copper tube it may slide better.
I just had one that was stuck and it worked for me.
Al
----- Original Message -----
From: "Paul Dorsey" <dorpaul@negia.net>
To: <triumphs@autox.team.net>
Sent: Saturday, September 16, 2006 4:04 PM
Subject: [TR] sticking SU piston
> Okay, While the Gasket Maker Goop is drying on my fixed fuel pump, let
> me
> ask this:
>
>
>
> The dome of one of my Su Carbs (H6) does not have correct alignment with
> its body, so much so that its piston gets stuck. Either loosening the
> three screws at its bottom and/or unscrewing the damper oil gauge stick
> allows the piston to go up and down. But, of course, how do I fix it?
>
> Thanks, Paul Dorsey
>
> 60 TR3
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|