- 1. [Healeys] O/D Installation (score: 1)
- Author: Kenny J <theswed@hotmail.com>
- Date: Tue, 2 Sep 2008 14:01:48 -0700
- Hey List, I am attempting to reinstall my O/D onto the gearbox. It slides on pretty easily until I get within the stud length (the last 1/2 - 3/4 inches) the O/D will not slide any further. Please He
- /html/healeys/2008-09/msg00023.html (6,588 bytes)
- 2. Re: [Healeys] O/D Installation (score: 1)
- Author: "Peter Schauss" <schauss@worldnet.att.net>
- Date: Tue, 2 Sep 2008 20:06:15 -0400
- You need to check that the thrust washer at the back of the overdrive case has not slipped out of place. Also, check that the splines on the various pieces back there line up. One other possibility
- /html/healeys/2008-09/msg00028.html (8,895 bytes)
- 3. Re: [Healeys] O/D Installation (score: 1)
- Author: WILLIAM B LAWRENCE <ynotink@msn.com>
- Date: Wed, 3 Sep 2008 00:52:50 +0000
- I think others have explained all of the things that need to be done to install the OD, but let me see if I can put it together. Use a long screw driver to align the internal splines in the overdrive
- /html/healeys/2008-09/msg00031.html (9,552 bytes)
- 4. Re: [Healeys] O/D Installation (score: 1)
- Author: David Nock <healeydoc@sbcglobal.net>
- Date: Wed, 3 Sep 2008 08:08:12 -0700
- DO NOT DO THIS !!!!!!!!!!!!! You should pull the overdrive together with two large channel lock pliers. If you can not pull it together by hand there is a miss alignment in side. I have sold many ad
- /html/healeys/2008-09/msg00034.html (7,682 bytes)
- 5. Re: [Healeys] O/D Installation (score: 1)
- Author: David Nock <healeydoc@sbcglobal.net>
- Date: Wed, 3 Sep 2008 08:19:57 -0700
- That is when the splines are meshing with the main shaft. So you will need to remove the overdrive and look inside and re align the splines. The easiest way is to stand the transmission on the floor
- /html/healeys/2008-09/msg00035.html (8,666 bytes)
This search system is powered by
Namazu